TCI intelligent control card
TRUEControl intelligent control cards are 2-zone control cards that can drive two MDRs simultaneously, reducing costs and increasing conveyor efficiency. The TCI control card has two control modes, PLC IO and a built-in ZPA mode. Multiple cards can interconnect serially with each other, creating a configuration network topology with simple wiring.
I/O interface
various shaft/
drive head
24 VDC
Build-in ZPA
function
- Specifications
- Product no. definition
- Built-in ZPA
- Dimension
General specifications | |
---|---|
Casing | IP20 protection; ABS VO flame retardant material |
Heatsink | Aluminum plate at bottom of the control card |
Rated voltage | 24 VDC |
Operating voltage range | 21.6 to 26.4 VDC |
Current consumption per MDR | 0.1 A @ standby (0.15 A for TCN series) 1.0 A/motor @no-load running Max. 3.0 A @Normal-mode; Max. 4.0 A @TURBO-mode |
Operating temp. | Ambient temperature 0°C to +40°C (+32°F to +104°F) |
Ambient humidity | 5% to 95%, non-condensing |
Installation altitude | Max. 1000 m |
Storage temperature | -40°C to +85°C (-40°F to +185°F) |
. | ||
---|---|---|
1 | Product code | TC (TRUEControl) |
2 | Interface | I/O (I), network (N) |
3 | Number of controllable rollers | 1, 2 |
4 | Hardware version | 01, 02, ... |
5 | ZPA | Z= ZPA function available |
6 | Firmware | E, P, I* version |
ZPA (Zero Pressure Accumulation) manages a conveyor system in small zones, adjusting individual zone transmission according to its upstream or downstream conditions.
Photo-eye sensors verify when products reach or leave a position, and check that products are conveyed downstream as needed.
Brake controls ensure that even when accumulation occurs, goods will not suffer undue collision that may result in crushing, falling, or incorrect transmission.