SWG1608-8GP series
8 x 10/100/1000Base-T Industrial PoE Switch
Bamboo SWG1608 series are unmanaged industrial grade PoE switches with 8-port 10/100/1000-T RJ45 (PoE; optional). It complies with IEEE802.3af/at standard PoE protocol, in which the Max power consumption can reach 30W (PoE+) per port. Moreover, it features port isolation, 250m long distance transmission mode (1-4 ports), QoS (1-2 ports) and PoE watchdog function, which all can be configured by the Dip switch on the top panel.
SWG1608 series are also high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, such as wide range power input 12-57VDC / 44-57VDC (PoE), redundant power design with polarity reverse protection, robust IP40 fan-less housing with Din-rail installation, extended operation temperature from -20 ℃ to +60 ℃ as well as high-level EMI/EMC capability and so on. It is the best choice for various environmental applications.
Base-T (PoE)
Ports
Industrial EMC
Protection
12 to 58 VDC
power input voltage
Dip switch
function
| Cellular Specification | ||
|---|---|---|
| Interface | Copper RJ45 ports | 8 |
| Ethernet | 8 x 10/100/1000Base-T RJ45 (PoE; optional) | |
| Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.3af Power-Over-Ethernet (PoE version) IEEE 802.3at Power Over Ethernet plus PSE (PoE version) |
|
| Dip Switch | 1. Port Isolation 2. 250m long distance mode (1-4 ports) 3. QoS (1-2 ports) 4. PoE watchdog (PoE version) 5. Broadcast storm restrain |
|
| LED | |
|---|---|
| P(Power indicator) Green | Off: the device is power off or failed On: the device power on is normal |
| S(PoE usage indicator) Red or S(System indicator) Red | ‧ PoE: Off: total PoE usage <rated 50 % Blinking: rated 50 % <total PoE usage <rated 90 % On: total PoE usage ≥ rated 90 % ‧ Non-PoE: Off: the chip is normal On: the chip read/write is abnormal |
| LAN (1-8) | ‧ Green indicators: Off: ports link down On: ports link up Blinking: data on TX/RX ‧ Yellow indicators (PoE version) Off: PoE not working On: PoE working ‧ Yellow indicators (non-PoE version) Off: port speed is 10/100M On: port speed is 1000M |
| Power parameters | |
|---|---|
| Input Voltage | 12-57VDC, 0.55A Max. 44-57VDC, 3.2A Max. (For 802.3af), 51-57VDC, 5.2A Max. (For 802.3at) |
| Input Current | 5.6A Max (PoE) 0.6A Max (non-PoE) |
| Total consumption | Full loading without PoE ≤5W PoE power budget ≤240W (PoE version) |
| Connection | Removable 4-pin terminal block |
| Reverse Polarity Protection | Support |
| Switching features | |
|---|---|
| Switching capacity | 16G |
| Packet forwarding rate | 23.8 Mpps |
| MAC address table | 16K |
| VLAN | 4K |
| Buffer | 2M |
| Forwarding delay | <5us |
| Jumbo Frame | Support 10Kbytes |
| MDX/MIDX | Support |
| Watchdog | Support |
| Mechanical structure | |
|---|---|
| Case protection | IP40 |
| Installation method | Din-rail |
| Dimension (W x H x D) | 48 mm x 98 mm x 98 mm |
| Weight | 0.6 Kg for PoE version 0.58 Kg for non-PoE version |
| Operating environment | |
|---|---|
| Operating temperature | -20 ℃ to +60 ℃ |
| Storage/transportation temperature | -40 ℃ to +85 ℃ |
| Relative humidity | 5 % to 95 % (non-condensing) |
| Warranty | 2 years |
| Regulatory Approvals | |
|---|---|
| Regulation | CE, FCC, LVD, RoHS |
| EMC | EN55032, EN55035, EN61000-6-2, EN61000-6-4 |
| Safety | EN 62368-1 |
| Immunity Standard | IEC61000-4-2 (ESD) IEC61000-4-3 (RS) IEC61000-4-4 (EFT) IEC61000-4-5 (Surge) IEC61000-4-6 (CS) IEC61000-4-8 (PFMF) IEC61000-4-11 (Dips) |
| Model | 10/100/1000Base-T(X) RJ45 with PoE | 10/100/1000Base-T(X) RJ45 |
|---|---|---|
| SWG1608-8GP | 8 | 0 |
| SWG1608-8G | 0 | 8 |